You're currently on:
A compact mixer with a difference. Forget the hype (a lot of semi-pro manufacturers are very good at hype!) – the MixWizards' pedigree becomes crystal clear if you actually get to listen to them alongside any other compact console.
There are no gimmicks here, just rock-solid construction (the same vertical PCB structure and panel-mounted pots as our GL and ML desks) and beautifully clean audio circuit design from experienced engineers who know a thing or two about sound. Others have tried to follow where the MixWizards have led, but we’ve never been beaten yet!
Features:
- Inputs
-16 mic / line channels with 4 band EQ, HPF, phantom power, 6 auxes, on switch with led and 100mm smooth action fader. A direct out and insert using all-metal TRS jacks are provided - Inputs
- Stereo Mix with AB out
- 6 Auxiliary Sends
- 4 Band EQ plus HPF
- 2 Stereo Returns
- On-board Digital FX
- Engineer’s Toolbox
- PSU
- Configuration Options
-Internal links to configure: Pre fade aux sends as pre EQ. Isolate pre-fade aux from channel on. Pre-fade direct out. EXT input -10dBV / +4dBu. Disable phantom power on selected channels - FX Editor software
Technical Specs
- Maximum output level
-XLR and jack +25dBu into 2k ohm load - Internal headroom
-Mix to output +23dB
-Channels +21dB
-Peak LEDs Turn on 5dB before clipping - Meters
-Peak reading 12 segment 0VU = +4dBu at L-R output
-3 colour led bargraph - Frequency response
-20Hz to 50kHz +0/-1dB - Total harmonic distortion
-measured at +14dBu 1kHz
-Channel to mix out < 0.008% - Crosstalk measured at 1kHz, ref driven channel
-L-R residual output noise < -90dBu (-94dB S/N)
-Channel off < -90dB - Noise measured rms 22Hz to 22kHz
-Mic EIN referred to 150 ohm sourc <-128dB
-L-R residual output noise < -90dBu (-94dB S/N)
-L-R faders unity mix noise < -84dBu (-88dB S/N) - Mains power Internal unit, linear regulated
-AC mains input 100 to 240V AC @ 50/60Hz
-Switch mode power supply with autosensing - Power consumption 30W max
-Mains fuse rating
-100-120V AC use T630mA 20mm
-220-240V AC use T315mA 20mm
Variant | 1 |