Skip to Store Area:

Welcome to JRRshop.com!

カートの中には何もありません。


You're currently on:

+ Click images to enlarge

Allen & Heath Xone: V6

この商品の最初のレビューを書く

Manufacturer

Availability: 在庫切れ

$4,799.95

クイックビュー

Allen & Heath's mission for Xone:V6 was simply to build the highest quality club mixer ever. A & H painstakingly refined our signal paths to optimise audio transparency. Hundreds of the best q...

Allen & Heath's mission for Xone:V6 was simply to build the highest quality club mixer ever. A & H painstakingly refined our signal paths to optimise audio transparency. Hundreds of the best quality components were evaluated and of these only the very finest were approved for the project. The result is a mixer that gives great recordings the space and freedom to express their full warmth and clarity.



FEATURES:

  • Input Channels 6 dual stereo channels with switchable sources [RCA]. CH1-4 are RIAA / Line, CH5-6 are Line / Line [RIAA inputs can be internally configured to line level if desired]. A rotary gain trim control knob is located in the meter housing on each channel - internal options for 0 /+6 / +10 dBu matching Valve [Tube] Section Channels 5-6 each have a stereo valve [tube] preamplifier - ideal for mellowing harsh digital music sources
  • Microphone input High quality mic input. Metal shrouded balanced XLR connector on rear panel. Phantom power can be internally selected.
  • A level control and 2 band EQ [120Hz / 2.5kHz] are on the front panel. A toggle switch selects mic on [when off, mic can be cued in headphone monitor]. Rear panel switch routes the mic to the booth output if needed. An insert point [TRS] jack is provided for external processing
  • EQ A large rotary control for high pass filter is provided on each channel, which sweeps from 30Hz to 600Hz - this is usually the only EQ needed as low end program can be filtered out as channels are mixed, thus preventing phasing and overload. The filter can be switched out using the hi-pass toggle switch. Insert points on each channel [rear - RCA] provide external processing access
  • Cue Intelligent cue system. Large chromed push buttons on each channel - illuminated by blue LED. Single push operation and auto-cancelling. Headphone monitoring incorporates a ‘mix/cue’ preview control, headphone level, and bass-cut / HF-lift tone control. Front and rear headphone jacks are provided
  • Rotary ‘Faders’ Precision Penny & Giles conductive plastic rotary controls are provided to mix the level on each channel
  • Insert Stereo Insert points [RCA] for each channel provide access to use external processing such as FX or EQ.
  • Possible future options for V6 may interconnect here Master Out
  • Rotary control for level. 2 band EQ providing +/- 6dB @ 80Hz and 10kHz. Balanced XLR outputs [+4dBu]. Insert points [TRS] & additional [TRS] jack -2dBu outputs and recording [RCA, -10dBV] outputs are also provided. Twin 1950s design illuminated VU meters provide accurate output level monitoring
  • Booth Monitor Output is balanced XLR at +4dBu. With level control, and 2 band EQ providing +/-6dB @ 100Hz and 10kHz
  • PSU Custom - external, stand alone [or wall-mount] power supply with unique intelligent circuitry which checks and monitors the mains AC voltage, and automatically configures the supply to suit. Voltage ranges from 100-265V @ 50/60Hz can be tolerated. Output is 60V up to 2 Amps with very low noise Options Potential options for valve inputs for all six channels. Add-on EQ expander with 3 band, semi-parametric midrange control for all six channels.
Variant該当無し