You're currently on:
BM14S II
The Dynaudio tradition continues in the new II-series subs, delivering Dynaudio's premium, professional sound quality and performance. Dynaudio Professional II-series precision subwoofers are made in Denmark using hand-crafted drivers that have made Dynaudio the industry standard in studios the world over.
The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII and BM12 mkIII monitors, adding extended bass in mid-sized mixing and recording environments.
Features
- 12" woofer with pure aluminum voice coil. 300W @ 4 ohm
- Phase adjustment in 0° / 180°; Auto on/off, power LED;
- Selectable LFE or slave mode
- Discrete LFE input, slave output for linking
- Seamless adjustment of low-pass corner frequencies
- SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 Hz.
- Closed cabinet for extremely precise low frequency reproduction
Technical Specifications
- ModelBM14S II
- SystemPrecision Subwoofer
- Frequency Response18 Hz to 250 Hz (+/-3 dB)
- InputsLFE/Slave, SAT/SUB, XLR right/left full bandwidth
- XLR Input impedance+ branch 20 kOhm, – branch 10 kOhm
- Sensitivity75 mVRMS to 5 VRMS, adjustable
- Max. Input voltage10 VRMS
- OutputsSlave, SAT/SUB, XLR right/left, High-pass filtered
- XLR Output impedance100 Ohm (each branch)
- XLR Pin-out1: 0 / 2: + / 3: –
- Mode selectorLFE, Slave (Phase and volume controls are bypassed in slave mode
- Phase adjustment0° - 180°
- SAT High-passFlat, 60 Hz, 80 Hz
- SUB Low-pass50 Hz to 150 Hz
- Auto ON/OFFAutomatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
- Amplifier power200 W, 4 Ohm
- Power consumption<16 W Standby, 325 W Max.
- Woofer300 mm/12”, One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4”, Pure aluminum voice coil
- Weight21 kg. / 46.3 lbs
- Dimensions (WxHxL)350 x 350 x 369.5 / 13.8” x 13.8” x 14.5”
- (Specs can change without notice)
Variant | 該当無し |