Skip to Store Area:

Welcome to JRRshop.com!

カートの中には何もありません。


You're currently on:

+ Click images to enlarge

Ebtech LLS-8 8-Channel Line Level Shifter

この商品の最初のレビューを書く

Manufacturer

Availability: 在庫切れ

$289.00

クイックビュー

Increase or decrease signal voltage (-10dBV and +4dBu) and eliminate ground loop hum simultaneously. Converts between balanced and unbalanced signals. 8 channel single space rack unit...
  • Increase or decrease signal voltage -10dBV and +4dBu without adding noise
  • Also contains hum eliminator technology
  • Also converts balanced and unbalanced signals
  • 1/4" jacks can accept any combination of mono or stereo plugs
  • Passive device No power required

 

The Line Level Shifter's primary function is to increase or decrease signal voltage back and forth between -10dBV and +4dBV (depending on which way you route through it). The Line Level Shifter also breaks loop antenna that causes ground hum and buzz as well as converting back and forth between balanced and unbalanced connections, preventing the cable from acting as an antenna for noise. Simply place a channel of the Line Level Shifter on the cable connections between the two mismatched pieces of equipment. Will not affect the quality of the audio, it will improve it.

We use 1/4" smart jacks that accept any combination of unbalanced (TS) or balanced (TRS) plugs. These are passive devices (no power required), in cold rolled steel housings, hand-soldered circuit boards, and top quality components and hardware.

 

Features

  • Converts back and forth between -10dBV and 4dBu
  • Converts automatically back and forth between balanced and unbalanced lines at either end 1/4" TRS "smart" jacks (tip, ring, sleeve) inputs and outputs
  • Built-in Hum Eliminator technology eliminates AC hum / 60Hz buzz and noise Automatically translates signal voltages to match differences in ground potentials, avoiding clipping
  • Completely passive design with audiophile quality components assures the best possible noise and distortion performance
  • Frequency response 10Hz to 40kHz plus or minus 1dB into 10kOhm load
  • Distortion less than 0.002% THD @ 1kHz
  • Crosstalk better than -97dB Maximum source impedance 1kOhm
  • Minimum load impedance 10kOhm
  • Available in 2 channel box or 8 channel single space rack versions
  • 2 Year warranty
  • Ebtech quality and reliability
  • Made in the U.S.A.
You may also be interested in:
Variant1