You're currently on:
ACTIVE 2-WAY PROFESSIONAL LOUDSPEAKER
Flagship of the line, the monitoring loudspeaker Alpha 80 is particularly ideal for producing music which is rich in bass or which requires high power reserves.
This model is composed of a 8” (21cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port and of a 1" (25mm) aluminum inverted dome tweeter. It features a 40W amplifier for the tweeter and a 100W amplifier for the woofer, and has a frequency response of 35Hz to 22kHz (+/- 3dB).
KEY POINTS
Low directivity: keeps the same sound throughout the room.
Damping and rigidity: neutrality, no distortion.
Tonal balance is identical at low and high volumes; low sensitivity to the wall effects.
Connect up to 2 audio sources.
Optimal acoustic integration.
Reduced power consumption.
Product Specification
Alpha 50, the most compact of the line, is equipped with a 1" (25mm) tweeter and a 5" (13cm) woofer. It features a 20W amplifier for the tweeter and a 35W amplifier for the woofer, and has a frequency response of 45Hz to 22kHz (+/- 3dB). It is perfectly adapted for confined spaces.
Automatic standby mode
2 constantly active XLR and RCA inputs
Adjustable bass and treble levels
Key points
• Low directivity: keeps the same sound throughout the room
• Damping and rigidity: neutrality, no distortion
• Tonal balance is identical at low and high volumes; low sensitivity to the wall effects • Connect up to 2 audio sources
• Optimal acoustic integration
• Reduced power consumption
Aluminium inverted dome tweeter
5" (13 cm) Polyglass cone
Large front port
Type | Monitoring Alpha 50 |
Frequency response (+/- 3dB) | 45Hz - 22kHz |
Power | 55W (35W+20W) |
Maximum SPL | 103dB SPL (pic @1m) |
Electronic section | |
Inputs Connectors | XLR balanced 10kOhms |
LF amplifier stage | 35W, class AB |
HF amplifier stage | 20W, class AB |
Standby mode Standby Activation of the monitor | After about 30 minutes without using the monitor By signal detection >3mV |
Power supply | 220-240V |
Connection | IEC inlet and detachable power cord |
User controls | |
Sensitivity | Adjustable, 0 or +6dB |
LF shelving (0 - 300Hz) | Adjustable, +/-6dB |
HF shelving (4.5 - 22kHz) | Adjustable, +/-3dB |
Power ON/OFF | Switch on rear panel |
Standby mode power consumption | < 0,5W |
Indicators | Power ON/OFF LED - Standby LED |
Transducers | |
Woofer | 5" (13cm) drive unit - Polyglass cone |
Tweeter | 1" (25mm) drive unit Aluminium inverted dome |
Cabinet | |
Construction | 0.6" (15mm) MDF |
Finish | Vinyl and Black painting |
Dimensions | 12.3x8.7x10.2" (313 x 220 x 258mm) |
Weight | 16.1lb (7.3kg) |
Variant | 1 |