Skip to Store Area:

Welcome to JRRshop.com!

カートの中には何もありません。


You're currently on:

+ Click images to enlarge

JZ Microphones V11 Vintage 11

この商品の最初のレビューを書く

Manufacturer

Availability: Usually ships within 2-7 days.

$699.00
Add Items to Cart

クイックビュー

The V11 is turning point for the praised Vintage series with absolutely new microphone design which follows the same vintage traditions and qualities as all JZ Microphones products and it is n...

The V11 is turning point for the praised Vintage series with absolutely new microphone design which follows the same vintage traditions and qualities as all JZ Microphones products and it is not a version or replica of classic and legendary microphones like U47, U67 or C12. The number 11 stands for a 2011 as reference year when a new classic microphone has been created. Vintage 11 is dedicated for everyone who loves recording in highest quality possible and wants something better than all known studio standards.


 


Vintage 11:


Transducer type  -  "electrostatic"


Operating principal  -  "pressure gradient"


Diaphragms active diameter  -  "27 mm"


Frequency range  -  "20 Hz to 20 kHz"


Polar pattern  -  "cardioid"


Output impedance  -  "50 ohms"


Rated load impedance  -  "1000 ohms"


Suggested load impedance  -  ">500 ohms"


Sensitivity at 1000 Hz into 1000 ohms load  -  "22 mV/Pa"


S/N Ratio CCIR 468-3 weighted  -  "76.5 dB"


S/N Ratio DIN/IEC 651 A-weighted  -  "87.5 dB-A"


Equivalent noise level DIN/IEC A-weighted  -  "6,5 dB-A"


Maximum SPL for 0.5% THD at 1000 ohm load  -  "134 dB"


Dynamic range of the microphone preamplifier  -  "128 dB"


Phantom powering voltage on pins 2 & 3 of XLR  -  "+48 V (+/-4 V)"


Current consumption  -  "<2 mA"


Output connector  -  "3-pin XLR male, gold plated contacts"


Signal polarity  -  "positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3"

Variant該当無し