You're currently on:
The S-120 Replacement Stylus is a genuine replacement part only for Ortofon S-120 series cartridges.
Technical Specification
Output voltage at 1000Hz, 5cm/sec. | 10 mV |
Channel balance at 1kHz | 1.5 dB |
Channel separation at 1kHz | 20 dB |
Channel separation at 15 kHz | 15 dB |
Frequency range at -3dB | 20-18,000 Hz |
Frequency response | 20-18,000 Hz +3dB/-2dB |
Tracking ability at 315 Hz at recommended tracking force | 120 μm |
Compliance, dynamic lateral | 11 μm/mN |
Stylus type | Spherical |
Stylus tip radius | R 18 μm |
Tracking force range | 1,5-10,0 g (15-100 mN) |
Tracking force recommended | 4.0g (40 mN) |
Tracking angle | 20° |
Internal impedance, DC resistance | 1,680 Ohm |
Internal inductance | 920 mH |
Recommended load resistance | 47 kOhm |
Recommended load capacitance | 200-600 pF |
Replacement stylus unit | S-120 |
Variant | 1 |