Skip to Store Area:

Welcome to JRRshop.com!

カートの中には何もありません。


You're currently on:

+ Click images to enlarge

RME QuadMic II

この商品の最初のレビューを書く

Manufacturer

Availability: Usually ships within 2-7 days.

$799.00
Add Items to Cart

クイックビュー

RME’s Multiface is the world’s most popular mobile recording interface. Due to the large demand for microphone inputs, RME has now developed two high-quality professional microphone preamps, w...

Overview

Connectivity/Features

  • 4 x Mic Preamp Inputs
  • XLR/TRS Combo Input
  • 4 x Line Outputs
  • Phantom power per channel
  • Low Cut per channel
  • Phase reversal per channel
  • DC powered, battery compatible
  • Low power / wide range DC operation


Excellent signal/noise ratio, lowest harmonic distortions and wide gain range make the QuadMic II a first choice for superior studio recordings. QuadMic II is battery powerable and thus excellent for remote applications.

Each of the 4 channels features balanced microphone and line inputs with Neutrik XLR/TRS combo jacks, switchable 48V phantom power, phase reversal and a low cut filter. 

All channels are also equipped with LEDs for signal presence, clip state, and activated phantom power. The input amplification can be set from 6 to 60 dB. The balanced line level output signals are provided on the rear of the unit as four 6.3 mm (1/4") TRS jacks. 

A maximum balanced and unbalanced output level of +21 dBu makes the QuadMic II fully compatible to RME's converters and interface series having analog inputs.

The QuadMic II complements any RME system with line inputs by adding external microphone inputs. Since the unit runs on supply voltages from 9 to 18V DC, it can operate on virtually any power source available, including batteries and rechargeable batteries.

 
Top

Tech Specs

Power supply: Operates with voltages ranging from 9-18V DC 

Operation with practically any DC power source, including (rechargeable) batteries

High-quality switching power supply included, for worldwide operation at 100-240 Volt 

Max. input level XLR: +15 dBu 

Max. input level TRS: +21 dBu 

Max. output level: +21 dBu 

SNR: 129 dB EIN @ 150 Ohm 

THD: < 0.0005% @ 30 dB Gain 

Wide frequency response with special RF input filter 

Frequency response: 5 Hz - 200 kHz, - 0.5 dB

Hi-pass filter at 80 Hz, 18 dB/oct

 

Accessories

  • External Power Supply for CardBus (NTCB-EU)
  • Line Cord for Power supply (NETZ-CB)
  • Car Cable for CardBus (AUTOK)
  • Cable for Storage Battery (AKKUK)

 

Variant1