You're currently on:
REVEAL 802
ROCK-SOLID BASS AT ANY VOLUME
by Future Music
In use, the standout quality of the 802s rushes to the fore with a pleasingly punchy bass response, with an extremely rounded tone. For the size and price, I was particularly impressed by the consistency and weight of this bottom end; these speakers really have been designed with low frequency clarity in mind. The more surprising yet equally pleasing aspect of the Reveal's design and signature sound is that the top end is more discreet than I was expecting. Rather than rushing out to meet and impress you in an ‘artificial’ way, the 802's treble end is a more sophisticated performer, providing more than adequate level without over-brightening sounds in a bid for instant gratification. This makes prolonged mixing sessions on these speakers much more pleasurable, lessening the likelihood of ear fatigue. (…) For hip-hop and EDM producers, you won’t fail to be impressed by the reach and clarity of the lowest frequencies of your mixes on these speakers, without things getting bogged down or messy. (…) Things just got a lot hotter in the active monitor department at this price point.
ROCK-SOLID BASS AT ANY VOLUME
Mixing bass-heavy hiphop or electronic music? Reveal 802 has you covered. Make no mistake, this is the ultimate near-field monitor for Low-End lovers, resting on decades of experience in loudspeaker research.
The custom 8" woofer and 1” tweeter tell you exactly what is going on in your mix through the finely tuned active crossover filter. Combine this with a new 100 watt bi-amp module and you get rock-solid bass at any volume.
EXPERTLY VOICED FOR MASSIVE SWEET SPOT
Custom tweaked by Tannoy’s in-house speaker guru, Dr. Paul Mills, the active cross-over filters of Reveal 802 have absolutely impeccable timing.
This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix – as well as invite people to sit in with you during mixing sessions.
EASY SETUP OPTION WITH AUX LINK
If you’re anything like us, you’re not only working on mixes but also listening to your favorite music! Reveal 802 gives you the ultimate pathway for both.
With the Aux Link, setting up has never been easier. Use the included mini jack cable to plug into your favorite music player and link your monitors for an instant stereo setup – no need for external interfaces
MONITORS FOR MUSICIANS
Making Monitors for Musicians is part of Tannoy’s DNA and that’s why musicians worldwide have timelessly turned to Tannoy when it comes to monitoring their music.
FEATURES: FRONT
- 1" soft-dome “Poke-Resistant” tweeter
- 8" custom high-efficiency LF woofer
- Accurately tuned front-firing bass port -allows near-wall placement and ensures optimal LF performance
FEATURES: REAR
- Balanced and unbalanced inputs for maximum flexibility
- Adjust volume and EQ to match your listening environment
- Plug in your phone /tablet for instant listening gratification
- 100 Watt Bi-Amp module and active crossover filter ensures maximum power and tonal clarity
- Rubber padded base for acoustical isolation
TECH SPECS
- General
- Frequency Response
- 42 Hz - 43 kHz
- Max SPL
- 114 dB
- Membrane Sizes
- LF/Mid Range
- 8" (200 mm)
- HF
- 1" Soft Dome (25 mm)
- Bi-amp Output Power, RMS
- Power Output
- 100 Watts
- LF/Mid Range
- 75 Watts
- HF
- 25 Watts
- THD
- < 0.4 %
- Input Types and Impedances
- Balanced
- XLR, 20 kOhm
- Unbalanced
- ¼" Jack, 10 kOhm
- AUX Link
- Mini Jack, 10 kOhm
- AUX Link Output
- Mini Jack
- EQ Options
- HF EQ Settings
- -1.5 dB HF Cut / Neutral / +1.5 dB HF Boost
- Crossover Frequency
- 1.8 kHz
- Low Frequency Alignment
- Optimized Front Port
- Cabinet Dimensions
- HxWxD, inches
- 15.4 x 10.0 x 11.8
- HxWxD, mm
- 390 x 254 x 300
Variant | 1 |