Skip to Store Area:

Welcome to JRRshop.com!

カートの中には何もありません。


You're currently on:

Tech 21 SansAmp Para Driver DI

+ Click images to enlarge

Tech 21 SansAmp Para Driver DI V2

この商品の最初のレビューを書く

Manufacturer

Availability: 在庫切れ

$209.00

クイックビュー

SansAmp Para Driver DIThis floor version of the RPM rackmount provides the same detailed tone shaping possibilities for any signal source...

SansAmp Para Driver DI

This floor version of the RPM rackmount provides the same detailed tone shaping possibilities for any signal source. It is particularly useful with acoustic, electric and bass guitars, and upright bass, either direct to a mixing console or with an instrument amplifier. The Para Driver DI gives your instrument a natural warmth and presence, as if miking it through a tube pre-amp. The SansAmp circuitry eliminates the harsh, unnatural harmonics of piezo pickups, while the Drive control offers some tasteful edge -- just a little or over-the-top.

Version 2 has exactly the same tonality and functionality with the addition of two new features: Rumble Filter and Air. The Rumble Filter removes unwanted sub-sonic frequencies that cause boominess and audible handling noises associated with acoustic guitars.The Air button adds top-end clarity and sparkle to acoustics.

 

FEATURES

    • Active tone controls with 12dB of cut or boost
    • Sweepable semi-parametric EQ
    • 1/4-inch 4.7 megOhm instrument level input
    • 1/4-inch and XLR outputs with selectable levels
    • Parallel, uneffected output to run a dry signal to a separate channel
Variant1