USED/TESTED - Comes With Original Packaging

Rockett was the manufacturer of the KTR pedal and they've taken that knowledge a step further with the "Archer". This pedal sounds not so much like the KTR but more the earlier hand-built version.....really remarkable. Smaller enclosure, built in the USA.

The Archer is sort of a 2 in one pedal. It can be used as just a clean boost by turning the gain all the way down. As you introduce gain it will attenuate the clean signal but there is a magical blend in between that you will find. Please experiment!!

The Archer is and boost/overdrive designed to simply cut through the mix with an astonishing mid-range chime, The Archer can be used as an exquisite clean boost or a thick and chewy OD. The magic in the Archer is within the mix of the gain and the clean boost to create a very sought after signature sound and feel. The Archer circuit is an extremely high headroom design operating at 18v.

Specs:

• 3 controls: output, treble and gain
• I/O jacks at the head of the pedal
• High headroom 18v circuit
• 9V DC operation with standard – tip and + sleeve
• Approximately 4" x 2.30"
• Buffered switching

In contrast to most overdrive pedals the Archer uses a mix of dirty and clean signal at 18 volts to create a very amp like sound and feel.

The Archer recreates a very signature tone extremely accurately and more importantly captures the true feel.

Dimensons: 4.00″ x 2.30″

9 volt Negative tip adaptor and a 5.5mm x 2.1mm jack.

9 volt Battery

Buffered Switching